WNT uses cookies in order to guarantee the best possible service.
By continuing to use this site, you agree to the use of cookies.
For more information, see our privacy policy.

Roughing at the highest level

With a depth of cut of ap 3.3 mm and maximum feed per tooth, the new HFC 19 high-feed milling system boasts phenomenal material removal rates, meaning that the system is primarily used when high chip volume and maximum process-security are required. The new indexable inserts feature a patented, rectangular geometry with a large radius and impress with nickel-plated tool holders, high rigidity and soft cutting capability. What’s more, stable mating surfaces ensure effective force transmission and minimise undesirable vibrations.

Advantages of the HFC 19 system

  • Extremely high material removal rates  
    A depth of cut of 3.3 mm and maximum feeds make extremely efficient roughing operations possible.
  • Extremely quiet running
    Cutting forces are exerted primarily in the axial direction, minimising vibration and reducing stress on the spindle, even with long tool overhangs.
  • Maximum process security
    Thanks to optimised chip gullets and process-secure chip evacuation.
  • Effective force transmission
    Stable mating surfaces ensure effective force transmission.

 

WNT Online Shop


XOLX 19

  • High rigidity
    Reduced power consumption and extremely quiet running; also ideal for machining unstable components
  • Stable with smooth cutting characteristics
    As a result of the patented, rectangular cutting edge geometry and large radius
  • High chip volume
    Thanks to large depth of cut and maximum feed per tooth

Practical test

Material: Ti6Al4V (3.7165)
Indexable insert: XOLX 190615ER-F40 HCN5240
Tool: AHFC.63.R.05-19

Cutting dataWNTCompetitor
vc in m/min5050
fz in mm0,710,25
ap in mm3,33
ae in mm4040
CoolantEmulsionEmulsion
Tool life/component31

Machining time in min